Proven support for your rotating equipment! This patented, two-piece shimmable design allows alignment changes to be made to correct for mis-alignment or cold to hot crankweb deflections. VIBRATHERM® chocks will easily replace existing solid or two-piece steel chocks and provide greater resistance to horizontal forces. VIBRATHERM® will also insulate the block by up to 30%. By reducing this heat, compressive strengths are higher, bond strength is better, and creep is lower. Therefore, the operating life of the epoxy grout is longer.
Vibratherm ® chocks give maximum support where it is needed most... at each bearing saddle. 
Vibratherm® Chock Brochure
|
|
|
4140-B7A Anchor Bolt System |
|
|
MagBolt™ Tension Indicator |
|
While it is the job of your foundation to hold your equipment up, it is the job of your anchor bolts to hold it down. Once a bolt has lost its stretch, it has quit doing its job. The MagBolt® measures the actual stretch in a bolt or stud due to tension, therefore eliminating the error caused by friction which occurs when using a torque wrench. The MagBolt® also permits the "wrenchless" checking of the tension in an anchor bolt/stud. 
MagBolts are prestressed and held at a predetermined preload in a 2,000 lb. winston hydraulic load cell in a climate controlled room. Magbolt™ Tension Indicator Brochure
|
|
|
E-ZEE Lift Port-a-Power Kits |
Alignment Problems?Engine Re-alignment made easy with E-ZEE Lift Eliminate point loading and the risk of stripping engine jackbolts. The E-Zee Lift system utilizes hydraulics to assist in alignment changes. The EZ-100 and EZ-200 come with various aluminum shims, Y connections, 10,000 psi gauge, lifting head, and Enerpac pump.
Units with stripped jackbolts, hard to reach jackbolts or no jack bolts can be re-aligned easily with the E-ZEE Lift. With a rated lifting capacity of 74,800 lbs. (1 inch) to 97,000 lbs. (2 inch), shim changes can be accomplished in a matter of minutes. EZEE Lift Port-a-Power Kit Brochure
For more information, call the support system experts at 573-754-4557 |
|
|
Support Systems 
